Operation 5
Checks and operations prior to comm
issioning
• Attachments (variant) must be properly
mounted and function according to the
operating instructions.
• All decal information signs must be in
place and legible. Replace damaged or
missing adhesive labels in accordance with
the overview in the "Identification points"
chapter.
• Any warning units (e.g. sign
al horn) must be
in perfect condition and fun
ction correctly.
• Check the visible areas of the hydraulic
system and hydraulic oil tank for damage
and leaks. Damaged hoses must be
replaced by the authorised service centre.
• The battery must be securely locked.
• Check the battery male conn
ector for dam-
age (e.g. cracks, breaks or
deformation of
the housing, bent or damage
d contacts). If
necessary, have the batter
y male connector
replaced by the authorised
service centre.
• The battery door must be closed correctly
and the door lock must be properly secured.
• The battery lock latches, the battery door
and the battery hood must not be damaged
or deformed.
• The battery hood must be c
losed correctly
and the hood lock must be p
roperly secured.
• The battery hood and battery door must
show no noticeable damage (e.g. cracks or
breaks).
• Steps must be clean and free of ice.
• Any panes of glass (vari
ant, e.g. wind-
screen) must be clean an
dfreeofice.
• Depending on the tyres, the truck may be
fitted with an antistatic belt. The antistatic
belt must not be damaged. It must also be
clean and long enough to touch the ground
• A tow coupling (variant) must show no
noticeable damage (e.g. coupling pin
bent, cracks or breaks). Every removable
coupling pin must be secured against loss
with a securing device (e.g. a chain, a split
pin or a rope).
• Damage or other defec
ts on the truck or
attachment (variant
) must be reported to
the supervisor or res
ponsible fleet manager
immediately so that t
hey can arrange for the
defect to be rectified
.
55
048011501 EN - 12/2015 69
To Next Page
Loading...
