5 Operation
Checks and operations prior to comm
issioning
6321_003-038
3
4
Adjusting the seat suspension
NOTE
The driver’s seat can be adjusted to suit the
weight of the individual driver. In order to
achieve the best seat suspension setting, the
driver should perform the adjustment whilst
sitting in the seat.
NOTE
The MSG 75 seat is equipped with electric air
suspension activated with an electric switch
instead of a lever (3).
– Fully extend weight adjusting lever (3).
– Pump it up or down to set the driver’s weight.
– Return the weight adjusting lever to the
central initial position before each new lift
(audible click).
– Fully fold in the weight adjusting lever once
adjustment is complete.
NOTE
The correct driver’s weight has been selected
when the arrow (4) is in the centre of the
inspection window. A noticeable empty lift on
the weight adjusting lever shows that you have
reached the minimum or maximum weight
setting.
6321_003-039
5
Adjusting the lumbar support (variant)
NOTE
The lumbar support can be adjusted to suit
the contours of the individual driver’s spine.
Adjusting the lumbar support moves a convex
support cushion into the upper or lower part of
the backrest.
– Turn the turning knob (5) up or down until
the lumbar support is in the desired position.
76
55048011501 EN - 12/2015
To Next Page
Loading...
