29.Hamburger menu
29.1. Help
You can find definitions for all elements that make up PolyScope capabilities.
1. In the right corner of the Header, tap the Hamburger menu and select Help.
2. Tap one of the red question marks that appears, to define desired element.
3. In the top right corner of element definition screen, tap the red X to exit Help.
29.2. About
You can display Version and Legal data.
1. Tap the Hamburger menu and select About.
2. Tap either Version or Legal to display data.
3. Tap Close to return to your screen.
29.3. Settings
Personalizing PolyScope Settings
1. In the Header, tap the Hamburger menu and select Settings.
2. In the Side Menu on the left, select an item to personalize. If an operational mode password
was set, in the Side Menu, System is only available to the programmer.
3. On the bottom right, tap Apply and Restart to implement your changes.
4. On the bottom left, tap Exit to close Settings screen without changes.
29.3.1. Preferences
Language
You can change PolyScope language and measurement unit (Metric or Imperial).
Time
You can access and/or adjust the current time and date displayed on the PolyScope.
1. In the Header, tap the Hamburger menu icon and select Settings.
2. Under Preferences, select Time.
3. Verify and/or adjust Time and/or Date as desired.
User Manual 259 UR5e
29.Hamburger menu
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
