12.Declarations and Certificates
EU Declaration of Incorporation in accordance with ISO/IEC 17050-1:2010
Manufacturer Universal Robots A/S
Energivej 25
DK-5260 Odense S Denmark
Person in the Community
Authorized to Compile the
Technical File
David Brandt
Technology Officer, Research and Development
Universal Robots A/S
Energivej 25, DK-5260 Odense S
Description and Identification
of the Partially-Completed
Machine(s)
Product and Function
Industrial robot (multi-axis manipulator with Control Box and
Teach Pendant). Function is determined by the completed
machine (with end-effector and intended use).
Model UR3e, UR5e, UR10e,UR16e (e-Series)
Serial Number Starting 20195000000 and higher — Effective 17 August 2019
Incorporation: Universal Robots UR3e, UR5e, UR10e and UR16e shall only be
put into service upon being integrated into a final complete
machine (robot system, cell or application), which conforms
with the provisions of the Machinery Directive and other
applicable Directives.
It is declared that the above products, for what is supplied, fulfill the following Directives as
detailed below:
IMachine Directive
2006/42/EC
The following essential requirements have been fulfilled: 1.1.2,
1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.6, 1.3.4, 1.3.8.1, 1.5.1, 1.5.2, 1.5.6,
1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3
It is declared that the relevant technical documentation has been
compiled in accordance with Part B of Annex VII of the
Machinery Directive.
IILow-voltage Directive
2014/35/EU
Reference the LVD and the harmonized standards used below.
IIIEMC Directive 2014/30/EU Reference the EMC Directive and the harmonized standards used
below.
IVRoHS Directive
2011/65/EU
Reference the RoHS Directive 2011/65/EU.
V WEEE Directive
2012/19/EU.
Reference the WEEE Directive 2012/19/EU.
UR5e 68 User Manual
12.Declarations and Certificates
Copyright © 2009–2021 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
