14-4
IM DL950-02EN
Setting Actions (Action Setup)
2.
Tap Action Setup, or press the soft key. The following screen appears.
Saves the waveform data
Set the waveform parameter save destination.
Saves a screen capture
Saves waveform parameters measured
automatically
Set mail transmission and the number of
mail transmissions.
Set the beep sound.
Screen capture data format (PNG, BMP, JPEG)
Set the auto file naming method
(Date, Numbering).
Set the waveform parameter file name.
Waveform data format
Set the creation of date file folders.
14.1 Performing GO/NO-GO Determination with Waveform Zones
To Next Page
Loading...
