Using the SAVE Menu
1.
On the waveform screen’s MENU, tap FILE > SAVE MENU, or press SHIFT+SAVE (MENU).
The following screen appears.
Turns the screen capture save feature
on or off
See “Save Setup.”
Save Setup (Save Setup)
2.
Tap Save Setup, or press the soft key. The following screen appears.
Turns the screen capture save
feature on or off
Set the save destination.
► sec. 19.4
Set auto naming. ► sec. 19.4
Set comments.
Set the file name. ► sec. 19.4
See “Screen Capture Detail
Setup.”
18.3 Saving Screen Captures to Files
18-5
IM DL950-02EN
To Next Page
Loading...
