P1086708-001 ZXP Series 9 Card Printer Service Manual 271
Replacement Procedures for the Printer
Procedures: InTM Payout Assembly
Tests and Adjustments
This procedure requires the InTM Payout Tool 105936-47 (also part of the ZXP9 Repair Kit 105936-
058). Contact Zebra Customer Service at +01 877-275-9327 for ordering information.
Starting at Step 18 and working the removal procedure in reverse through Step 3, complete the
procedure as follows:
Step 1. Set the InTM payout tool in place.
Step 2. Hook the InTM payout tool to the adjustment plate, and set the tool to #4.
To Next Page
Loading...