Zebra ZXP 9 Series User Manual

P1086708-001 ZXP Series 9 Card Printer Service Manual 89
Operation
Operator Control Panel (OCP)
Network Settings Menu
Main Menu
Network Settings Menu
UP DOWN SELECT
RETURN WITHOUT SAVE
SET IP ADDRESS
Change the IP address of the printer.
SAVE SETTINGS
SET SUBNET MASK Change the subnet mask.
SET DEFAULT GATEWAY Change the gateway.
DHCP MODE
Enable or disable DHCP mode.

Zebra ZXP 9 Series Specifications

General

Resolution	300 dpi
Card Capacity Output	100 cards
Memory	64 MB
Interface	USB, Ethernet
Operating Humidity	20% to 80% non-condensing
Print Technology	Dye Sublimation
Print Speed YMCK	Up to 190 cards/hour
Card Capacity Input	100 cards
Card Sizes	CR-80 ISO 7810
Connectivity	USB, Ethernet
Operating System	Windows, Linux
Options	Magnetic stripe encoding
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	15°C to 35°C
Card Thickness	10-40 mil