Abbott CELL-DYN 3000 - WBC Analysis

28 Oct
1997 20:45
CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
TROUBLESHOOTING
IP - 16 Alarm 4 (l) Time-out Moving Mixing Paddle, 7 of 7
1 - 66
1
Search
Book TOC
Go Back
IP - 16 Alarm 4 (l) Time-out Moving Mixing Paddle, 7 of 7
Replace Mixing (Z2) Motor
and CPU Main Bd. (PL-4.2
& PL-8.1; See
Interrelationship Matrix -
Pg. 3-4)
Replace CPU Main Bd.
(PL-8.1; See
Interrelationship Matrix
- Pg. 3-4)
Yes
No
Measure Ohms at
Motor Side of
CN8 Connector
or Across Mixing
(Z2) Motor
15
Ω
Across Mixing
(Z2) Motor
?
6
Yes
SL-148D
CN1


Pin 3 =
+24V±1


CN1
[CE
MARK]
[NON-
CE MARK]
CPU Main Bd.
CN1 Pin 3 to GND
= +24V
?
[CE MARK]
- Replace Power Supply (PL-10.7)
[NON-CE MARK]
- Replace +24V Power Supply (PL-10.8)
(See Interrelationship Matrix - Pg. 3-4)
No