Abbott CELL-DYN 3000 - VP3.2 Platen Wall Check

28 Oct
1997 21:57
CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
VERIFICATION PROCEDURES
VP - 3.2 Platen Wall Check
3 - 20
3
Search
Book TOC
Go Back
VP - 3.2 Platen Wall Check
Purpose:
Perform this procedure to verify Platen Walls are square to one another and Rack Guides
and Beam Block are ali
g
ned.
1. Check fit of Rack Guide Ali
g
nment Tool in Positions 1,2,3,4.
• If Check is OK,
g
o to “VP - 3.4 Rack Clearance Check” (Pa
g
e 3-26).
• If Check Fails,
g
o to “VP - 3.3 Platen Wall Adjustment” (Pa
g
e 3-22).
Special Tools
DESCRIPTION QTY PN
Rack Guide
Ali
g
nment Tool
1 9420084