Abbott CELL-DYN 3000 - Operational Messages and Data Flagging

28 Oct
1997
CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
PARTS LISTS 2.2 PARTS LISTS CROSS REFERENCE 2 - 3
2
Search
Book TOC
Go Back
2.2 PARTS LISTS CROSS REFERENCE
Description Location
AC Line Filter PL-10.2
Barb Reducer PL-7.2
Barb T .062" x .062" x .062" PL-7.10
Barcode Laser Head PL-5.5
Barcode Power Supply PL-10.3
Beam Block (White) Asm PL-2.5
Belt, Needle (Z1) Drive PL-5.3
Black Beam Block Detector PL-6.1
Blue Tubing 1/16" IDx 1/8" OD PL-7.6
Bubble Trap PL-5.9
Cable, +5 to +24V Power Supply PL-10.4
Cable, Analyzer to Sample Loader
CH-1
PL-8.11
Cable, Keyboard to CN2 PL-9.1
Cable, Mixing Motor 2 to CN11 PL-8.6
Cable, Power Supply PL-10.6
Cable, Power Supply to CN1 and
Barcode Reader to CH2
PL-8.10
Cable, Rack Sensors to CN3 PL-8.2
Cable, Tower Sensor PL-4.10
Cable, Tower Solenoid Vent Valve
CN10 (Pins 3 & 4) and Wash Valve
(Pins 7&8)
PL-8.13
Cable, Tray Solenoid to CN9 PL-8.5
Cable, X/Y Motor to CN7 PL-8.8
Cable, X/Y Sensor to CN4 PL-8.3
Cable, Y-Pusher Solenoid to CN10
(Pins 1 & 2)
PL-8.14
Cable, Z Sensors/Cover Sensor to
CN5
PL-8.4
Cable, Z2 (UP/DN) Motor and Mixing
Motor 1 to CN8
PL-8.7
Contact Sensor PL-4.8
Coupler, Z2 (UP/DN) Mixing Motor PL-4.3
Cover, Keyboard Diagnostic PL-9.2
Firmware PL-8.9
Fuse (Optional for non-USA 220
5MMX20MM 2.0A 250V)
PL-10.13
Fuse Fast 5MMX20MM 1.6A 250V PL-10.13
Insert, Metal Tubing Support PL-7.11
Keyboard Asm PL-9.3
Laser Shield (Front Cover) PL-6.2
Description Location