Agilent Technologies Nano Indenter G200 User Manual

NanoSuite Explorer D
Agilent Nano Indenter G200 User’s Guide D-21
Select Insert Input to add an input via the Insert New Variable dialog
box, shown in
Figure D-26.
Figure D-26Insert New Variable dialog box
1 Enter a name in the Internal Name text box.
2 Select either the Sample or Test radio button.
A sample-level input has the same value for every test within a sample.
A test-level input can have a different value for every test within a
sample. Use Sample unless you are using a test method that operates in
Individual mode (either NanoVision or the Nano UTM).
3 Click OK.
The new input will be inserted into the list of inputs in the Settings pane.
Select Delete Inputs to delete an input via the Delete Input dialog box,
as shown in
Figure D-27 on page D-22. Select the input that you want to
delete and then click OK.
NOTE
The naming convention for internal names is alphanumeric characters
only with no spaces.

Agilent Technologies Nano Indenter G200 Specifications

General

Brand	Agilent Technologies
Model	Nano Indenter G200
Category	Laboratory Equipment
Language	English