NanoSuite Explorer D
Agilent Nano Indenter G200 User’s Guide D-24
The first four commands are identical to those in Figure D-25 on
page D-20, with the following exceptions:
The Insert Input command enables you to add a input to the selected
subfolder. The Delete Input command enables you to delete inputs from
the selected subfolder only. The two Insert Category commands enable
you to insert a input subfolder before or after the selected subfolder.
Select Rename Category to rename a category subfolder via the
Rename Category dialog box, shown in
Figure D-31. Enter the new
name of the category and click OK.
Figure D-31Rename Category dialog box
Select Delete this Category to delete the selected category subfolder;
this is equivalent to pressing the Delete key.
Configuration Items
Configuration items contain instructions that control test flow, data
analysis, and presentation. Click a configuration item to reveal its
settings in the Settings pane.
Figure D-32 shows the right-click menu.
Figure D-32Configuration Items right-click menu
The commands in this menu should be used only under the guidance of
an applications engineer.
To Next Page
Loading...
