Lateral Force Measurement F
Agilent Nano Indenter G200 User’s Guide F-2
Quick Start Guide
To perform a scratch test using the lateral force probes, you have to open
a method for it. All methods related to LFM testing are in the Scratch
with Lateral Force folder from the Method menu, as shown in
Figure F-1.
Figure F-1Scratch with Lateral Force folder in Open Method dialog
box
1 Choose Method > Open Method.
2 Select G-Series Ramp Load Scratch with LFM from the Filename
drop-down menu as shown in
Figure F-2.
3 Click OK.
Figure F-2Open LFM method
Once the method has been opened, continue with the procedure:
To Next Page
Loading...
