Quick Start Guide 2
Agilent Nano Indenter G200 User’s Guide 2-50
The Statistics panel at the bottom of the screen displays results from
each test, such as the results shown in
Figure 2-69. Note the specific
results to be displayed are determined by the instructions in the method.
Take a few minutes to look at the results for each test.
Figure 2-69Statistics data from second batch
The first test in this particular sample failed as evidenced by the warning
message and the invalid results (****) in the first row in the results
table. When a test fails, a warning message is issued to describe the
reason for the failure as shown in
Figure 2-70.
Figure 2-70Test failure warning message
Any channel may be plotted on the X or Y axis by right-clicking on the
Review Graph and selecting the channel.
To Next Page
Loading...
