BERT OptionsBERT Options
OTN-relatedOTN-related
These items appear if OTN TxOTN Tx and OTN RxOTN Rx are selected on Setup screen.
OTNOTN
G.8201, M.2401 (M.2110)
Time periodTime period
15 minutes, 1 hour, 2 hours, 24 hours, 7 days
AllocationAllocation
Touching the SetupSetup button launches the dialog box. Refer to Performance
Parameters in "OTN Application" .
Ethernet-relatedEthernet-related
10G WAN appears if Port on the Test Setup screen is set to '10 Gbps WAN'.
ETHETH
M.2100
10G WAN10G WAN
G.826, G.826+G.829, M.2101.1(M.2100)
This option appears in the BERT application.
Count lost frames as pattern errorsCount lost frames as pattern errors
Enabling this function means that if a frame is lost then all test pattern bits in
the frame are considered errored and will be included in the pattern error
counter.
Include addresses in frame filter on receiverInclude addresses in frame filter on receiver
When enabling this function, the Ethernet frames which their destination
addresses match to following items will appear on the Streams screen.
Src MAC
Src IP
VLAN ID
Src Port
This setting makes the effect to only following measurement results on the
Statistics screen.
BERTBERT Mon./GenMon./Gen
BERT
Latency
Jitter
Multi Stream Transmit
Multi Stream Throughput
Multi Stream Frame Loss
Multi Stream Latency
Multi Stream Jitter
This setting does not effect to Frame Capture.
To Next Page
Loading...
