Version 6.6 185 Mediant 2000
User's Manual 14. Services
The handling of LDAP queries with the LDAP cache is shown in the flowchart below:
Figure 14-2: LDAP Query Process with Local LDAP Cache
The LDAP Settings page is used for configuring the LDAP cache parameters.
Notes:
• The LDAP cache parameters are available only if you have enabled the LDAP
service (see 'Configuring the LDAP Server' on page 183).
• If on the first LDAP query, the result fails for at least one attribute and is
successful for at least one, the partial result is cached. However, for subsequent
queries, the device does not use the partially cached result, but does a new query
with the LDAP server again.
• For a full description of the cache parameters, see 'Configuration Parameters
Reference' on page 503.
To Next Page
Loading...
Need help?
General
