Version 6.6 397 Mediant 2000
User's Manual 32. Restarting a B-Channel
32 Restarting a B-Channel
You can restart a specific B-channel belonging to an ISDN or CAS trunk, using the SNMP
MIB variable, acTrunkISDNCommonRestartBChannel or the EMS management tool (refer
to the EMS User's Manual). This may be useful, for example, for troubleshooting specific
voice channels.
Notes:
• If a voice call is currently in progress on the B-channel, it is disconnected when
the B-channel is restarted.
• B-channel restart can only be done if the D-channel of the trunk to which it
belongs is synchronized (Layer 2).
• B-channel restart does not affect the B-channel's configuration.
To Next Page
Loading...
Need help?
General
