Version 6.6 695 Mediant 2000
User's Manual 46. DSP Templates
46 DSP Templates
This section lists the DSP templates supported by the device. Each DSP template provides
support for specific voice coders (as well as channel capacity and various features).
Notes:
• DSP templates 1 and 2 are not supported on reduced hardware assemblies (i.e.,
one or two trunks).
• To select the DSP Template that you want to use on the device, see Configuring
DSP Templates on page 176.
• Installation and use of voice coders is subject to obtaining the appropriate license
and royalty payments.
• The number of channels refers to the maximum channel capacity of the device.
• For additional DSP templates, contact your AudioCodes representative.
DSP Firmware Templates
DSP Template
0 1 2 5
Number of Channels
Default Setting
480 320 240 240
With 128 ms EC
400 320 240 240
With SRTP
400 - 160 240
With IPM Detectors
400 320 240 240
With IPM Detectors &
SRTP
320 - 160 240
Voice Coder
Transparent
Yes Yes Yes Yes
G.711 A/m-law PCM
Yes Yes Yes Yes
G.727
Yes Yes Yes Yes
G.726 ADPCM
Yes Yes Yes Yes
G.723.1
Yes - - -
G.729 A, B
Yes Yes Yes -
GSM FR
Yes Yes - -
MS GSM
Yes Yes - -
EVRC
- - Yes -
QCELP
- - Yes -
AMR
- Yes - -
GSM EFR
- Yes - -
iLBC
- - - Yes
To Next Page
Loading...
Need help?
General
