User's Manual 354 Document #: LTRT-68822
Mediant 2000
26.8 Configuring Voice Mail
The Voice Mail Settings page allows you to configure the voice mail parameters. For a
description of these parameters, see 'Configuration Parameters Reference' on page 503.
Notes:
• The Voice Mail Settings page is available only for CAS interfaces.
• For more information on configuring voice mail, refer to the CPE Configuration
Guide for Voice Mail User's Manual.
 To configure the Voice Mail parameters:
1. Open the Voice Mail Settings page (Configuration tab > VoIP menu > GW and IP to
IP > Advanced Applications > Voice Mail Settings).
Figure 26-6: Voice Mail Settings Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 396.
To Next Page
Loading...
Need help?
General
