EasyManuals Logo

AudioCodes Mediant 2000 User Manual

AudioCodes Mediant 2000
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #536 background imageLoading...
Page #536 background image
User's Manual 536 Document #: LTRT-68822
Mediant 2000
45.4.6 IPSec Parameters
The Internet Protocol security (IPSec) parameters are described in the table below.
IPSec Parameters
Parameter Description
IPSec Parameters
Web: Enable IP Security
EMS: IPSec Enable
[EnableIPSec]
Enables IPSec on the device.
ï‚§ [0] Disable (default)
ï‚§ [1] Enable
Note: For this parameter to take effect, a device reset is required.
Web: IKE Certificate Ext
Validate
[IKEcertificateExtValida
te]
Enables the validation of the extensions (keyUsage and
extentedKeyUsage) of peer certificates. This validation ensures that the
signing CA is authorized to sign certificates and that the end-entity
certificate is authorized to negotiate a secure IPSec connection.
ï‚§ [[0] Disable (default)
ï‚§ [1] Enable
IPSec Associations Table
Web: IP Security
Associations Table
EMS: IPSec SA Table
[IPSecSATable]
This table parameter defines the IPSec SA table. This table allows you to
configure the Internet Key Exchange (IKE) and IP Security (IPSec)
protocols. You can define up to 20 IPSec peers.
The format of this parameter is as follows:
[ IPsecSATable ]
FORMAT IPsecSATable_Index =
IPsecSATable_RemoteEndpointAddressOrName,
IPsecSATable_AuthenticationMethod, IPsecSATable_SharedKey,
IPsecSATable_SourcePort, IPsecSATable_DestPort,
IPsecSATable_Protocol, IPsecSATable_Phase1SaLifetimeInSec,
IPsecSATable_Phase2SaLifetimeInSec,
IPsecSATable_Phase2SaLifetimeInKB, IPsecSATable_DPDmode,
IPsecSATable_IPsecMode, IPsecSATable_RemoteTunnelAddress,
IPsecSATable_RemoteSubnetIPAddress,
IPsecSATable_RemoteSubnetPrefixLength,
IPsecSATable_InterfaceName;
[ \IPsecSATable ]
For example:
IPsecSATable 1 = 0, 10.3.2.73, 0, 123456789, 0, 0, 0, 0, 28800, 3600, ;
In the above example, a single IPSec/IKE peer (10.3.2.73) is configured.
Pre-shared key authentication is selected, with the pre-shared key set to
123456789. In addition, a lifetime of 28800 seconds is selected for IKE
and a lifetime of 3600 seconds is selected for IPSec.
Note: For a detailed description of this table, see 'Configuring IP Security
Associations Table' on page 140.
IPSec Proposal Table
Web: IP Security
Proposal Table
EMS: IPSec Proposal
Table
[IPSecProposalTable]
This table parameter defines up to four IKE proposal settings, where
each proposal defines an encryption algorithm, an authentication
algorithm, and a Diffie-Hellman group identifier.
[ IPsecProposalTable ]
FORMAT IPsecProposalTable_Index =
IPsecProposalTable_EncryptionAlgorithm,
IPsecProposalTable_AuthenticationAlgorithm,

Table of Contents

Other manuals for AudioCodes Mediant 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 2000 and is the answer not in the manual?

AudioCodes Mediant 2000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 2000
CategoryGateway
LanguageEnglish

Related product manuals