User's Manual 60 Document #: LTRT-68822
Mediant 2000
A confirmation message box appears requesting you to confirm switching of modules.
Figure 4-26: Confirmation Message Box for Switching Modules
2. Click OK; the Web Login screen of the switched module's Web interface appears.
3. Enter the login username and password, and then click Login.
4.3 Configuring Web User Accounts
You can create up to 10 Web user accounts for the device. Up to five Web users can
simultaneously be logged in to the device's Web interface. Web user accounts prevent
unauthorized access to the Web interface, enabling login access only to users with correct
credentials (i.e., username and password). Each Web user account is composed of the
following attributes:
Username and password: Credentials that enable authorized login access to the
Web interface.
Access level (user type): Access privileges specifying what the user can view in the
Web interface and its read/write privileges. The table below describes the different
types of Web user account access levels:
Access Levels of Web User Accounts
User Access
Level
Numeric
Representation*
Privileges
Master
220
Read / write privileges for all pages. Can create all user
types, including additional Master users and Security
Administrators. It can delete all users except the last
Security Administrator.
Security
Administrator
200
Read / write privileges for all pages. It can create all user
types and is the only one that can create the first Master
user.
Note: There must be at least one Security Administrator.
Administrator
100
Read / write privileges for all pages except security-
related pages, which are read-only.
Monitor
50
No access to security-related and file-loading pages;
read-only access to other pages.
No Access
0
No access to any page.
Note: This access level is not applicable when using
advanced Web user account configuration in the Web
Users table.
* The numeric representation of the access level is used only to define accounts in a RADIUS
server (the access level ranges from 1 to 255).