Version 6.6 461 Mediant 2000
User's Manual 40. Reporting Information to External Party
40.2.2 CDR Field Description
This section describes the CDR fields that are generated by the device.
40.2.2.1 CDR Fields for Gateway/IP-to-IP Application
The CDR fields for the Gateway / IP-to-IP application are listed in the table below.
CDR Fields for Gateway/IP-to-IP Application
Field Name Description
GWReportType
Report type:
ï‚§ CALL_START
ï‚§ CALL_CONNECT
ï‚§ CALL_END
Cid
Port number
SessionId
SIP session identifier
Trunk
Physical trunk number
Note: This field is applicable only to the Gateway application.
BChan
Selected B-channel
Note: This field is applicable only to the Gateway application.
ConId
SIP conference ID
Note: This field is applicable only to the Gateway application.
TG
Trunk Group ID
Note: This field is applicable only to the Gateway application.
EPTyp
Endpoint type:
ï‚§ FXO
ï‚§ FXS
ï‚§ EANDM
ï‚§ ISDN
ï‚§ CAS
ï‚§ DAA
ï‚§ IPMEDIA
ï‚§ NETANN
ï‚§ STREAMING
ï‚§ TRANSPARENT
ï‚§ MSCML
ï‚§ VXML
ï‚§ IP2IP
Orig
Call originator:
ï‚§ LCL (Tel side)
ï‚§ RMT (IP side)
SourceIp
Source IP address
DestIp
Destination IP address