EasyManuals Logo

AudioCodes Mediant 2000 User Manual

AudioCodes Mediant 2000
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #243 background imageLoading...
Page #243 background image
Version 6.6 243 Mediant 2000
User's Manual 19. Introduction
19 Introduction
This section describes configuration of the Gateway and IP-to-IP applications. The
Gateway application refers to IP-to-Tel (PSTN) call routing and vice versa. The IP-to-IP
application refers to call routing of calls received from the IP and forwarded to an IP
destination. For a description of the IP-to-IP application, see IP-to-IP Routing Application
on page 245.
Notes:
• In some areas of the Web interface, the term "GW" and "IP2IP" application refers
to the Gateway and IP-to-IP applications, respectively.
• The terms IP-to-Tel and Tel-to-IP refer to the direction of the call relative to the
device. IP-to-Tel refers to calls received from the IP network and destined to the
PSTN/PBX (i.e., telephone connected directly or indirectly to the device); Tel-to-IP
refers to calls received from the PSTN/PBX, and destined for the IP network.

Table of Contents

Other manuals for AudioCodes Mediant 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 2000 and is the answer not in the manual?

AudioCodes Mediant 2000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 2000
CategoryGateway
LanguageEnglish

Related product manuals