User's Manual 80 Document #: LTRT-68822
Mediant 2000
Command Short
Format
Arguments Description
following:
 0 = NO_ALARMS (means stop
sending AIS)
 1 = AIS_ALARM
 2 = STOP_RAI_ALARM
 3 = SEND_RAI_ALARM
DeleteCasFile
PS/CAS/DC
F
<TableIndex> Deletes all the device's CAS files when
<TableIndex> is set to -1 (other options
are currently not supported).
5.4.7 LDAP Commands
The commands under the IPNetworking\OpenLdap directory allow you to perform various
Lightweight Directory Access Protocol (LDAP) actions.
Table 9: LDAP Commands
Sub-Command Arguments Description
LdapSTatus
- Displays the LDAP connection status.
LdapSearch
<search key> <attribute1>
[<attribute 2> ...<attribute
5>]
Searches an LDAP server. The parameters
enclosed by [] are optional.
LDapOpen
- Opens a connection to the LDAP server using
parameters provided in the configuration file.
LDapSetDebugmode
<mode> Sets the LdapDebugLevelMode parameter.
Possible levels 0-3.
LDapGetDebugmode
- Gets the LdapDebugLevelMode parameter
value
To Next Page
Loading...
Need help?
General
