Version 6.6 33 Mediant 2000
User's Manual 3. Introduction
3 Introduction
This part provides an overview of the various management tools that can be used to
configure the device. It also provides step-by-step procedures on how to configure the
management settings.
The following management tools can be used to configure the device:
Embedded HTTP/S-based Web server - see 'Web-based Management' on page 35
Command Line Interface (CLI) - see 'CLI-Based Management' on page 71
AudioCodes Element Management System - see EMS-Based Management on page
87
Simple Network Management Protocol (SNMP) browser software - see 'SNMP-Based
Management' on page
81
Configuration ini file - see 'INI File-Based Management' on page 89
Notes:
• Some configuration settings can only be done using a specific management tool.
For example, some configuration can only be done using the Configuration ini file
method.
• Throughout this manual, where a parameter is mentioned, its corresponding Web,
CLI, and ini parameter is mentioned.
• For a list and description of all the configuration parameters, see 'Configuration
Parameters Reference' on page 503.
• The ini file parameters are enclosed in square brackets [...].