AudioCodes Mediant 2000 User Manual

Version 6.6 63 Mediant 2000
User's Manual 4. Web-Based Management
c. Click Change Password; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
d. Log in with your new password.
4. To change the access level of the optional, second account:
a. Under the Account Data for User: User group, from the 'Access Level' drop-
down list, select a new access level user.
b. Click Change Access Level; the new access level is applied immediately.
4.3.2 Advanced User Accounts Configuration
This section describes advanced Web user account configuration. This is relevant if you
need the following management scheme:

Enhanced security settings per Web user (e.g., limit session duration)

More than two Web user accounts (up to 10 Web user accounts)

Master users
This advanced Web user configuration is done in the Web Users table, which is initially
accessed from the Web User Accounts page (see procedure below). Once this table is
accessed, subsequent access immediately opens the Web Users table instead of the Web
User Accounts page.
Notes:
• Only the Security Administrator user can initially access the Web Users table.
• Only Security Administrator and Master users can add, edit, or delete users.
• Admin users have read-only privileges in the Web Users table. Monitor users have
no access to this page.
• If you delete a user who is currently in an active Web session, the user is
immediately logged off by the device.
• All users can change their own passwords. This is done in the WEB Security
Settings page (see 'Configuring Web Security Settings' on page 67).
• To remove the Web Users table and revert to the Web User Accounts page with
the pre-configured, default Web user accounts, set the ResetWebPassword ini file
parameter to 1. This also deletes all other Web users.
• Once the Web Users table is accessed, Monitor users and Admin users can only
change their passwords in the Web Security Settings page (see 'Configuring Web
Security Settings' on page 67). The new password must have at least four
different characters than the previous password. (The Security Administrator users
and Master users can change their passwords in the Web Users table and in the
Web Security Settings page.)
• This table can only be configured using the Web interface.

AudioCodes Mediant 2000 Specifications

General

Brand	AudioCodes
Model	Mediant 2000
Category	Gateway
Language	English