User's Manual 62 Document #: LTRT-68822
Mediant 2000
Notes:
• The access level of the Security Administrator cannot be modified.
• The access level of the second user account can be modified only by the Security
Administrator.
• The username and password can be a string of up to 19 characters. When you log
in to the Web interface, the username and password string values are case-
sensitive, according to your configuration.
• Up to two users can be logged in to the Web interface at the same time, and they
can be of the same user.
 To configure the two pre-configured Web user accounts:
1. Open the Web User Accounts page (Configuration tab > System menu > Web User
Accounts). If you are logged in as Security Administrator, both Web user accounts
are displayed (as shown below). If you are logged in with the second user account,
only the details of this user account are displayed.
Figure 4-27: WEB User Accounts Page (for Users with 'Security Administrator' Privileges)
2. To change the username of an account:
a. In the 'User Name' field, enter the new user name.
b. Click Change User Name; if you are currently logged in to the Web interface with
this account, the 'Web Login' dialog box appears.
c. Log in with your new user name.
3. To change the password of an account:
a. In the 'Current Password' field, enter the current password.
b. In the 'New Password' and 'Confirm New Password' fields, enter the new
password.
To Next Page
Loading...
Need help?
General
