User's Manual 400 Document #: LTRT-68822
Mediant 2000
TFTP during device startup. If the ini file does not contain a specific auxiliary file type,
the device uses the last auxiliary file of that type that was stored on its non-volatile
memory.
Notes:
• You can schedule automatic loading of updated auxiliary files using HTTP/HTTPS,
FTP, or NFS. For more information on automatic updates, see 'Automatic Update'
on page 423.
• When loading an ini file using this Web page, parameters that are excluded from
the loaded ini file retain their current settings (incremental).
• Saving an auxiliary file to flash memory may disrupt traffic on the device. To avoid
this, disable all traffic on the device by performing a graceful lock as described in
'Locking and Unlocking the Device' on page 395.
• For deleting auxiliary files, see 'Viewing Device Information' on page 437.
The procedure below describes how to load Auxiliary files using the Web interface.
To load auxiliary files to the device using the Web interface:
1. Open the Load Auxiliary Files page (Maintenance tab > Software Update menu >
Load Auxiliary Files).
Note: The appearance of certain file load fields depends on the installed Software
License Key.
To Next Page
Loading...
