User's Manual 450 Document #: LTRT-68822
Mediant 2000
The fields in this page are described in the following table:
Call Counters Description
Counter Description
Number of Attempted
Calls
Indicates the number of attempted calls. It is composed of established
and failed calls. The number of established calls is represented by the
'Number of Established Calls' counter. The number of failed calls is
represented by the failed-call counters. Only one of the established /
failed call counters is incremented every time.
Number of Established
Calls
Indicates the number of established calls. It is incremented as a result
of one of the following release reasons if the duration of the call is
greater than zero:
 GWAPP_REASON_NOT_RELEVANT (0)
 GWAPP_NORMAL_CALL_CLEAR (16)
 GWAPP_NORMAL_UNSPECIFIED (31)
And the internal reasons:
 RELEASE_BECAUSE_UNKNOWN_REASON
 RELEASE_BECAUSE_REMOTE_CANCEL_CALL
 RELEASE_BECAUSE_MANUAL_DISC
 RELEASE_BECAUSE_SILENCE_DISC
 RELEASE_BECAUSE_DISCONNECT_CODE
Note: When the duration of the call is zero, the release reason
GWAPP_NORMAL_CALL_CLEAR increments the 'Number of Failed
Calls due to No Answer' counter. The rest of the release reasons
increment the 'Number of Failed Calls due to Other Failures' counter.
Percentage of
Successful Calls (ASR)
The percentage of established calls from attempted calls.
Number of Calls
Terminated due to a
Busy Line
Indicates the number of calls that failed as a result of a busy line. It is
incremented as a result of the following release reason:
GWAPP_USER_BUSY (17)
Number of Calls
Terminated due to No
Answer
Indicates the number of calls that weren't answered. It's incremented
as a result of one of the following release reasons:
 GWAPP_NO_USER_RESPONDING (18)
 GWAPP_NO_ANSWER_FROM_USER_ALERTED (19)
 GWAPP_NORMAL_CALL_CLEAR (16) (when the call duration is
zero)
Number of Calls
Terminated due to
Forward
Indicates the number of calls that were terminated due to a call
forward. The counter is incremented as a result of the following release
reason: RELEASE_BECAUSE_FORWARD
Number of Failed Calls
due to No Route
Indicates the number of calls whose destinations weren't found. It is
incremented as a result of one of the following release reasons:
 GWAPP_UNASSIGNED_NUMBER (1)
 GWAPP_NO_ROUTE_TO_DESTINATION (3)
Number of Failed Calls
due to No Matched
Capabilities
Indicates the number of calls that failed due to mismatched device
capabilities. It is incremented as a result of an internal identification of
capability mismatch. This mismatch is reflected to CDR via the value of
the parameter DefaultReleaseReason (default is
GWAPP_NO_ROUTE_TO_DESTINATION (3)) or by the
GWAPP_SERVICE_NOT_IMPLEMENTED_UNSPECIFIED (79)
reason.
To Next Page
Loading...
Need help?
General
