User's Manual 468 Document #: LTRT-68822
Mediant 2000
Attribute
Number
Attribute
Name
Vendor
Specific
Attribute
(VSA) No.
Purpose
Value
Format
Example AAA
26 h323-
incoming-
conf-id
1 SIP call identifier Up to 32
octets
- Start Acc
Stop Acc
26 h323-remote-
address
23 IP address of the
remote gateway
Numeric - Stop Acc
26 h323-conf-id 24 H.323/SIP call
identifier
Up to 32
octets
- Start Acc
Stop Acc
26 h323-setup-
time
25 Setup time in NTP
format 1
String - Start Acc
Stop Acc
26 h323-call-
origin
26 The call’s originator:
Answering (IP) or
Originator (PSTN)
String Answer,
Originate
etc
Start Acc
Stop Acc
26 h323-call-
type
27 Protocol type or
family used on this
leg of the call
String VoIP Start Acc
Stop Acc
26 h323-
connect-time
28 Connect time in NTP
format
String - Stop Acc
26 h323-
disconnect-
time
29 Disconnect time in
NTP format
String - Stop Acc
26 H323-
Disconnect-
Cause
30 Q.931 disconnect
cause code
Numeric - Stop Acc
26 h323-gw-id 33 Name of the gateway String SIPIDString Start Acc
Stop Acc
26 sip-call-id 34 SIP Call ID String abcde@ac.
com
Start Acc
Stop Acc
26 call-
terminator
35 The call's terminator:
PSTN-terminated call
(Yes); IP-terminated
call (No).
String Yes, No Stop Acc
30 called-
station-id
- Destination phone
number
String 800456714
5
Start Acc
31 calling-
station-id
- Calling Party Number
(ANI)
String 513567212
7
Start Acc
Stop Acc
40 acct-status-
type
- Account Request
Type (start or stop)
Note: ‘start’ isn’t
supported on the
Calling Card
application.
Numeric 1: start, 2:
stop
Start Acc
Stop Acc
41 acct-delay-
time
- No. of seconds tried
in sending a particular
record
Numeric 5 Start Acc
Stop Acc
To Next Page
Loading...
Need help?
General
