Version 6.6 507 Mediant 2000
User's Manual 45. Configuration Parameters Reference
Parameter Description
Web: Bronze Priority
EMS: Bronze Service
Class Priority
[VLANBronzeServiceCla
ssPriority]
Defines the VLAN priority (IEEE 802.1p) for the Bronze CoS content.
The valid range is 0 to 7. The default is 2.
Layer-3 Class of Service (TOS/DiffServ) Parameters
Web: Network QoS
EMS: Network Service
Class Diff Serv
[NetworkServiceClassDi
ffServ]
Defines the Differentiated Services (DiffServ) value for Network CoS
content.
The valid range is 0 to 63. The default is 48.
Note: For this parameter to take effect, a device reset is required.
Web: Media Premium
QoS
EMS: Premium Service
Class Media Diff Serv
[PremiumServiceClassM
ediaDiffServ]
Defines the DiffServ value for Premium Media CoS content (only if
IPDiffServ is not set in the selected IP Profile).
The valid range is 0 to 63. The default is 46.
Note: The value for the Premium Control DiffServ is determined by the
following (according to priority):
ï‚§ IPDiffServ value in the selected IP Profile (IPProfile parameter).
ï‚§ PremiumServiceClassMediaDiffServ.
Web: Control Premium
QoS
EMS: Premium Service
Class Control Diff Serv
[PremiumServiceClassC
ontrolDiffServ]
Defines the DiffServ value for Premium Control CoS content (Call
Control applications) - only if ControlIPDiffserv is not set in the selected
IP Profile.
The valid range is 0 to 63. The default is 40.
Notes:
ï‚§ The value for the Premium Control DiffServ is determined by the
following (according to priority):
SiglPDiffserv value in the selected IP Profile (IPProfile
parameter).
 PremiumServiceClassControlDiffServ.
Web: Gold QoS
EMS: Gold Service Class
Diff Serv
[GoldServiceClassDiffS
erv]
Defines the DiffServ value for the Gold CoS content (Streaming
applications).
The valid range is 0 to 63. The default is 26.
Web: Bronze QoS
EMS: Bronze Service
Class Diff Serv
[BronzeServiceClassDiff
Serv]
Defines the DiffServ value for the Bronze CoS content (OAMP
applications).
The valid range is 0 to 63. The default is 10.