AudioCodes Mediant 2000

Version 6.6 525 Mediant 2000
User's Manual 45. Configuration Parameters Reference
Parameter Description

(7) Web & Telnet Access List

(8) WEB User Accounts
 [naa] Non-Authorized Access = Attempt to access the Web
interface with a false or empty user name or password.
 [spc] Sensitive Parameters Value Change = Changes made to
sensitive parameters:

(1) IP Address

(2) Subnet Mask

(3) Default Gateway IP Address

(4) ActivityListToLog
 [ll] Login and Logout = Every login and logout attempt.
For example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa',
'spc'
Note: For the ini file, values must be enclosed in single quotation
marks.
[FacilityTrace]
Enables ISDN traces of Facility Information Elements (IE) for ISDN call
diagnostics. This allows you to trace all the parameters contained in
the Facility IE and view them in the Syslog.
 [0] Disable (default)
 [1] Enable
Note: For this feature to be functional, the GWDebugLevel parameter
must be enabled (i.e., set to at least level 1).
Web: Debug Recording
Destination IP
[DebugRecordingDestIP
]
Defines the IP address of the server for capturing debug recording.
Web: Debug Recording
Destination Port
[DebugRecordingDestP
ort]
Defines the UDP port of the server for capturing debug recording. The
default is 925.
Debug Recording Status
[DebugRecordingStatus
]
Activates or de-activates debug recording.
 [0] Stop (default)
 [1] Start
Logging Filters Table
Web: Logging Filters
Table
[LoggingFilters]
This table parameter defines logging filtering rules for Syslog
messages and debug recordings. The format of this parameter is as
follows:
[ LoggingFilters ]
FORMAT LoggingFilters_Index = LoggingFilters_Type,
LoggingFilters_Value, LoggingFilters_Syslog,
LoggingFilters_CaptureType;
[ \LoggingFilters ]
Note: For a detailed description of this table, see 'Filtering Syslog
Messages and Debug Recordings' on page 481.