AudioCodes Mediant 2000 User Manual

Version 6.6 527 Mediant 2000
User's Manual 45. Configuration Parameters Reference
Parameter Description
6 sec.
 [4] = 10 BootP retries, 30 sec.
 [5] = 20 BootP retries, 60 sec.
 [6] = 40 BootP retries, 120 sec.
 [7] = 100 BootP retries, 300
sec.
 [15] = BootP retries
indefinitely.

[4] = 7 DHCP packets
 [5] = 8 DHCP packets
 [6] = 9 DHCP packets
 [7] = 10 DHCP packets
 [15] = 18 DHCP packets
[BootPSelectiveEnable]
Enables the Selective BootP mechanism.
 [1] = Enabled
 [0] = Disabled (default)
The Selective BootP mechanism (available from Boot version 1.92)
enables the device's integral BootP client to filter unsolicited
BootP/DHCP replies (accepts only BootP replies that contain the text
'AUDC' in the vendor specific information field). This option is useful in
environments where enterprise BootP/DHCP servers provide undesired
responses to the device's BootP requests.
Notes:
 For this parameter to take effect, a device reset is required.
 When working with DHCP (i.e., the parameter DHCPEnable is set to
1), the selective BootP feature must be disabled.
[BootPDelay]
Defines the interval between the device's startup and the first
BootP/DHCP request that is issued by the device.
 [1] = (Default) 1 second
 [2] = 3 second
 [3] = 6 second
 [4] = 30 second
 [5] = 60 second
Note: For this parameter to take effect, a device reset is required.
[ExtBootPReqEnable]
Determines whether the device uses the Vendor Specific Information
field in the BootP request to provide device-related initial startup
information.
 [0] = (Default) Disabled.
 [1] = Enables extended information to be sent in BootP requests.
The device uses the Vendor Specific Information field in the BootP
request to provide device-related initial startup information such as
device type, current IP address, software version. For a full list of the
Vendor Specific Information fields, refer to the AcBootP Utility User's
Guide. The AcBootP utility displays this information in the 'Client
Info' column.
Notes:
 For this parameter to take effect, a device reset is required.
 This option is not available on DHCP servers.

AudioCodes Mediant 2000 Specifications

General

Brand	AudioCodes
Model	Mediant 2000
Category	Gateway
Language	English