AudioCodes Mediant 2000 User Manual

User's Manual 670 Document #: LTRT-68822
Mediant 2000
Parameter Description
Web: Tel2IP Default
Redirect Reason
[Tel2IPDefaultRedirectRea
son]
Determines the default redirect reason for Tel-to-IP calls when no
redirect reason (or “unknown”) exists in the received Q931 ISDN Setup
message. The device includes this default redirect reason in the SIP
History-Info header of the outgoing INVITE.
If a redirect reason exists in the received Setup message, this
parameter is ignored and the device sends the INVITE message with
the reason according to the received Setup message. If this parameter
is not configured (-1), the outgoing INVITE is sent with the redirect
reason as received in the Setup message (if none or “unknown” reason,
then without a reason).
 [-1] Not Configured = (Default) Received redirect reason is not
changed
 [1] Busy = Call forwarding busy
 [2] No Reply = Call forwarding no reply
 [9] DTE Out of Order = Call forwarding DTE out of order
 [10] Deflection = Call deflection
 [15] Systematic/Unconditional = Call forward unconditional
Web: Redirect Number SIP
to TEL
EMS: Set IP To Tel Redirect
Screening Indicator
[SetIp2TelRedirectScreeni
ngInd]
Determines the value of the Redirect Number screening indicator in
ISDN Setup messages.
 [-1] Not Configured (default)
 [0] User Provided
 [1] User Passed
 [2] User Failed
 [3] Network Provided
Web: Set IP-to-TEL
Redirect Reason
[SetIp2TelRedirectReason
]
Defines the redirect reason for IP-to-Tel calls. If redirect (diversion)
information is received from the IP, the redirect reason is set to the
value of this parameter before the device sends it on to the Tel.
 [-1] Not Configured (default)
 [0] Unkown
 [1] Busy
 [2] No Reply
 [3] Network Busy
 [4] Deflection
 [9] DTE out of Order
 [10] Forwarding DTE
 [13] Transfer
 [14] PickUp
 [15] Systematic/Unconditional

AudioCodes Mediant 2000 Specifications

General

Brand	AudioCodes
Model	Mediant 2000
Category	Gateway
Language	English