Version 6.6 99 Mediant 2000
User's Manual 9. Configuring Certificates
To configure OCSP:
1. Open the General Security Settings page (Configuration tab > VoIP menu >
Security > General Security Settings).
Figure 9-4: OCSP Parameters
2. Configure the OCSP parameters as required. For a description of these parameters,
see OCSP Parameters on page 537.
3. Click Submit.
Notes:
• The device does not query OCSP for its own certificate.
• Some PKIs do not support OCSP but generate Certificate Revocation Lists
(CRLs). For such cases, set up an OCSP server such as OCSPD.
To Next Page
Loading...
