11
of 820
Parameter manual b maXX BM3000
Document no.: 5.12001.07
1GENERAL
1.1 Information about the Parameter Manual
The Operating Manual for the b maXX 3000 (5.11018) provides important information re-
garding handling the device. A prerequisite for safe working is compliance with all speci-
fied safety information and handling instructions.
Furthermore, the local accident prevention regulations and general safety requirements
applicable to the area of application of the device must be observed.
Before starting any work on the device, completely read through the Operating Manual,
in particular the chapter on safety information. The Operating Manual is an integral part
of the product and must be kept in the immediate vicinity of the device in order to be ac
-
cessible to personnel at all times.
The Parameter Manual provides information about the parameters for the b maXX 3000,
for
controller firmware from Version 01.13
The parameters are used to influence the behavior of the drive controller.
The controller controls the behavior of the power unit and the connected motor.
To Next Page
Loading...
Need help?
General