Baumuller b maXX BM3000 - Autotuning Asynchronous Motor; Identification Lh Characteristic

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
215
of 820
4
4.4.9 Autotuning Asynchronous Motor
4.4.9.1 Identification Lh characteristic
The procedure to identify the Lh characteristic curve is described detailed in chapter ZLh-
characteristic– on page 149 as a part of the configuration of the asynchronous motor. The
detailed description is in chapter ZProDrive Lh-characteristic– on page 151.