Baumuller b maXX BM3000 - 3 Commissioning Bm3 Xxx

45
of 820
Parameter manual b maXX BM3000
Document no.: 5.12001.07
3COMMISSIONING BM3XXX
This chapter describes a specimen commissioning of a b maXX
®
axis unit BM3xxx in
conjunction with a Baumüller DS56-S motor.
Perform the commissioning to satisfy yourself that the supplied device is functioning prop-
erly.
This commissioning does not constitute a complete set-up of the device for your applica-
tion.
Before the commissioning, make sure that the technical requirements are met:
1 All points, including the installation, in the b maXX
®
3000 Operating Manual
(5.11018) have been followed.
2 Check of the requirements for the electrical supply.
3 Check of the requirements for the electrical cables and provision of appropriate ca-
bles.
4 Check of the characteristics of the connections and manufacture of the appropriate
cables.