Commissioning BM3xxx
Parameter manual b maXX BM3000
Document no.: 5.12001.07
47
of 820
3
3.2 Voltage test
3.3 Requirements for the electrical supply
For all important data, see the Operating Manual for the b maXX 3300.
Small deviations in the electrical supply from the requirements can result in malfunctions
of the device. If the supply deviates greatly from the requirements, the device could be
destroyed.
DANGER!
Danger to life from electric current!
When this electrical unit is operated, certain parts of the unit are of necessity at a haz-
ardous voltage.
Therefore:
m Pay attention to the areas on the device that could be dangerous during the elec-
trical installation.
Figure 32: Danger areas during electrical installation
DANGER!
Risk of fatal injury from electrical current!
During the routine test of these devices, a voltage test is performed by Baumüller
Nürnberg GmbH in accordance with EN
61800-5-1, Section 5.2.3.2. It is thus unnec-
essary for the customer to do this.
Therefore:
m Subsequent tests of the devices using high voltages may only be performed by
Baumüller Nürnberg GmbH.
m Disconnect the converter from the system during high-voltage testing!
To Next Page
Loading...
Need help?
General