Baumuller b maXX BM3000 - 2 Commissioning Bm25 Xx

15
of 820
Parameter manual b maXX BM3000
Document no.: 5.12001.07
2COMMISSIONING BM25XX
This chapter describes a specimen commissioning of a decentralized drive b maXX
®
BM2500. An axis unit, a controller part and a motor are integrated in one housing.
Perform the commissioning to satisfy yourself that the supplied device is functioning prop-
erly.
This commissioning does not constitute a complete set-up of the device for your applica-
tion.
Before the commissioning, make sure that the technical requirements are met:
1 All points, including the installation, in the b maXX
®
2500 Operating Manual
(5.16020) have been followed.
2 Check of the requirements for the electrical supply.
3 Check of the requirements for the electrical cables and provision of appropriate ca-
bles.
4 Check of the characteristics of the connections and manufacture of the appropriate
cables.