Safety information
Parameter manual b maXX BM3000
Document no.: 5.12001.07 Baumüller Nürnberg GmbH
16
of 820
2.1
2.1 Safety information
NOTE!
The installation and initial commissioning are carried out exclusively by the manufac-
turer's employees or by qualified personnel.
Qualified personnel are persons who, due to their training, experience, instruction
and knowledge of the relevant standards and specifications, accident prevention reg
-
ulations and operating conditions of the person responsible for the safety of the in-
stallation have been authorized to carry out the activities required in each case and
in so doing are able to recognize and avoid potential dangers. The qualifications re
-
quired for working on the unit are, for example:
m Training or instruction or authorization to commission, ground and characterize
power circuits and devices in accordance with safety engineering standards.
m Training or instruction in accordance with safety engineering standards in the care
and use of appropriate safety equipment.
WARNING!
Danger due to incorrect installation and initial commissioning!
Installation and initial commissioning require qualified personnel with adequate expe-
rience. Errors during installation can lead to life-threatening situations or result in sig-
nificant material damage.
Therefore:
m Have the installation and initial commissioning carried out exclusively by the man-
ufacturer's employees or by qualified personnel.
DANGER!
Danger to life from electric current!
When this electrical unit is operated, certain parts of the unit are of necessity at a haz-
ardous voltage.
Therefore:
m Pay attention to the areas on the device that could be dangerous during the elec-
trical installation.
To Next Page
Loading...
Need help?
General