Baumuller b maXX BM3000 User Manual

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
81
of 820
4
4.3.1.2 Description of the Parameters
1.1 System clock
Operation time of the controller in seconds. System clock continues to count after voltage
(24
V) was turned on and off.
1.2 System ticks RT1
Display of the value of a counter which is incremented in TASK_RT1.
1.3 System ticks RT2
Display of the value of a counter which is incremented in TASK_RT2 by the ratio
TASK_RT2/TASK_RT1, so that System Ticks RT2 and System Ticks RT1 have approx
-
imately the same value.
102.24 Board data status UDINT 0 0xFFFF 0 1:1 X
102.25 Hardware board identification STRING 1:1
102.26 Circuit board assembly STRING 1:1
102.28 Hardware date STRING 1:1
102.30 Controller serial number UDINT 0 0xFFFFFFFF 0 1:1
102.31 Controller article number UDINT 0 0xFFFFFFFF 0 1:1
102.32 Device serial number UDINT 0 0xFFFFFFFF 0 1:1
102.33 Device article number UDINT 0 0xFFFFFFFF 0 1:1
102.35 Device type Code STRING 1:1
139.1 Password UINT 0 0xFFFF 0 1:1
139.2 Baudrate UDINT 9600 921600 38400 1:1
139.25 Switch-on time UDINT 0 0xFFFFFFFF 0 s 1:1 X
139.26 Shutdown delay UDINT 0 0xFFFFFFFF 0 ms 1:1 X X
158.1 Real time load FLOAT 0 1 0 % 1:1 X
158.2 Real time load average FLOAT 0 1 0 % 1:1 X
158.3 Max real time load FLOAT 0 1 0 % 1:1 X
158.4 Interrupt load FLOAT 0 1 0 % 1:1 X
158.5 Interrupt load average FLOAT 0 1 0 % 1:1 X
158.6 Interrupt load max FLOAT 0 1 0 % 1:1 X

Baumuller b maXX BM3000 Specifications

General

Brand	Baumuller
Model	b maXX BM3000
Category	Measuring Instruments
Language	English