Baumuller b maXX BM3000 - Page 373

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
373
of 820
4
105.8 Dataset source
Designation of the source data set number for data set operations such as, e.g., copying.
105.9 Dataset dest
Designation of the target data set number for data set operations such as, e.g., creating
or deleting data sets.
105.11 Name of complete parameter set
Denomination for the complete parameter set of the drive.
105.12 Error count
Number of valid messages in array parameter Z105.3– Message.
105.13 Config Ident number
User-definable identification number for the complete parameter set of the drive.
5 0: Data Set 6 deleted
1: Data Set 6 created
6 0: Data Set 7 deleted
1: Data Set 7 created
15 ... 7 Reserved
Bit Meaning