Baumuller b maXX BM3000 - Page 517

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
517
of 820
4
152.15 Upper threshold absolute UDINT
If the data type of the parameter selected with Z152.3– is INT, DINT, UINT, UDINT,
WORD or DWORD, then this parameter forces the upper absolute switching threshold.
The absolute two-level controller switches off, if the following is valid:
Parameter number actual value  upper absolute switch threshold
152.16 Lower threshold relative UDINT
If the data type of the parameter selected with Z152.4– is INT, DINT, UINT, UDINT,
WORD or DWORD, then this parameter forces the lower relative switching threshold.
The relative two-level controller switches on, if the following is valid:
Parameter number actual value  parameter number relative compare value + 
lower relative switch threshold
152.17 Upper threshold relative UDINT
If the data type of the parameter selected with Z152.4– is INT, DINT, UINT, UDINT,
WORD or DWORD, then this parameter forces the upper relative switching threshold.
The relative two-level controller switches off, if the following is valid:
Parameter number actual value  parameter number relative compare value + 
upper relative switch threshold