Operating Modes
Parameter manual b maXX BM3000
Document no.: 5.12001.07 Baumüller Nürnberg GmbH
606
of 820
4.8
Example:
Z119.5– Max. Jerk = 2.0 Inc/ms³
Z119.3– Acceleration = 30.0 Inc/ms²
Time after which the acceleration is reached:
t = 30.0 Inc/ms² / 2.0 Inc/ms³ = 15 ms
119.7 Output position set value
This parameter indicates the desired position calculated by the manual drive operation.
119.8 Output speed set value
This parameter is used to show the output desired speed generated by manual drive op-
eration.
119.9 Output acceleration set value
This parameter is used to show the output desired acceleration generated by manual
drive operation.
To Next Page
Loading...
Need help?
General