Baumuller b maXX BM3000 User Manual

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
709
of 820
4
104.2 Status
This parameter shows the current status of the module.
104.3 Signal In 1 source Pxxx
The parameter number for the signal source of Channel 1 can be entered here. Entries
are only possible with the FFT command Stop.
104.4 Signal In 2 source Pxxx
The parameter number for the signal source of Channel 2 can be entered here. Entries
are only possible with the FFT command Stop.
104.6 Signal Out target Pxxx
The parameter for a target parameter can be entered here. The output signal from the
signal generator is thereby routed through the system as an excitation signal. Entries are
only possible with the FFT command Stop.
Status Meaning
0 Idle
1 Initialization Memory
3 Initialization Window Function
5 Start Average
8 Get Signal Initialization
9 Get Signal
11,12 Windowing Signal Ch1, Ch2
13,15 FFT Ch1, Ch2
17 Standardization
20,22 Auto, Cross Spectrum
24, 25, 26 ÜTF, PHI, Coherence Calculation
28 Check Average
40 FFT result is available for readout
41 Finish

Baumuller b maXX BM3000 Specifications

General

Brand	Baumuller
Model	b maXX BM3000
Category	Measuring Instruments
Language	English