Baumuller b maXX BM3000 User Manual

Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
87
of 820
4
102.31 Controller article number
Article number of the controller-PCB as a 32 bit numerical value.
102.32 Device serial number
Serial number of the device as a 32 bit numerical value.
102.33 Device article number
Article number of the device as a 32 bit numerical value.
102.35 Device type code
Complete BM device type code including safety level of the form:
BM3XXX-XXXX-XXXXX[-X]-XXXXX[-S0X]-XX[-XX][-EXX][-#XX]
139.1 Password
Password for protecting access to system parameters. The value displayed corresponds
to the password level.
139.2 Baudrate
Baud rate for serial communication
Valid baud rates: 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 Baud
Each time the controller is switched on, the baud rate is set to 38400.
NOTE!
The controller has several possible interfaces for accessing parameters (serial inter-
face as well as up to three EOE channels).
The handling of the password-protected levels is not interface-oriented. If an inter-
face channel switches to a password level, the corresponding access permission
also applies to all the other channels.

Baumuller b maXX BM3000 Specifications

General

Brand	Baumuller
Model	b maXX BM3000
Category	Measuring Instruments
Language	English