INSTALLATION AND STARTUP
4-60 Belanger, Inc.® * PO BOX 5470. * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL220
Chapter 4 Frame and Carriage Assembly
Loading Standard Top Wheel Neo-Tex™
4) Install 2 rows of 10” wide material.
Install 1 row of 8” wide material.
Install one more row of 10” wide material.
Secure another Clamp Assembly snug against the Wash Clips as shown below.
5) Install 1 row of 10” wide material.
Install another of the Clamp assemblies and snug it against the Wash Clips as shown below.
6) Install the last row of 10” wide material.
Install the last Clamp assembly and snug it against the Wash Clips as shown below.
To Next Page
Loading...
