Belanger FreeStyler - Nozzle Chart

INSTALLATION AND STARTUP
22-20 Belanger, Inc.® * PO BOX 5470. * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL220
Chapter 22 Initial Startup
Nozzle Chart
Nozzle Configuration for all Systems (driver side and passenger side)
Entrance Wheels
Entrance Pods
Exit Wheels
Exit Pods
Top Wheel Nozzle
Upper Nozzle:
1.0GPM @ 65°
1NOZZL-FJ638,
TIP: PLSTC 6510
Lower Nozzle:
0.4GPM @ 25°
1NOZZL-FJ254,
TIP: PLSTC, 2504
Upper Nozzle:
1.5GPM @ 65°
1NOZZL-FJ696,
TIP PLSTC 6515
Lower Nozzle:
1.0GPM @ 25°
1NOZZL-FJ058,
TIP: PLSTC 2510
Upper Nozzle:
0.5GPM @ 40°
1NOZZL-FJ232,
TIP: PLSTC 4005
Lower Nozzle:
0.4GPM @ 15°
1NOZZL-FJ254,
TIP: PLSTC 1504
Upper Nozzle:
1.5GPM @ 65°
1NOZZL-FJ696,
TIP: PLSTC 6515
Lower Nozzle:
1.0GPM @ 25°
1NOZZL-FJ058,
TIP: PLSTC 2510
Two Nozzles:
1.0GPM @ 40°
1NOZZL-FJ348,
TIP: PLSTC 4010
Exit Pod Nozzle Body
Exit Wheel Nozzle Body
Exit Pod Nozzle Body
Entrance Wheel
Nozzle Body
Entrance Pod
Nozzle Body
Exit Wheel Nozzle Body
Entrance Wheel
Nozzle Body
Entrance Pod
Nozzle Body
Direction of
Travel
Top Wheel Nozzle